2-928
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show lacp-channel
show lacp-channel
To display information about the Link Aggregation Control Protocol (LACP) channel, use the show
lacp-channel command.
show lacp-channel
show lacp-channel sys-id
show lacp-channel group [admin-key] [info [type] | statistics]
show lacp-channel [channel_id] [info [type] | statistics | mac]
show lacp-channel hash channel_id {{src_ip_addr [dest_ip_addr]} | dest_ip_addr |
{src_mac_addr [dest_mac_addr]} | dest_mac_addr | {src_port dest_port} | dest_port}
show lacp-channel traffic [channel_id]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
sys-id Displays the system identifier adopted by LACP.
group Displays all the ports that belong to a channel.
admin-key (Optional) Number of the administrative key; valid values are from 1 to
65535.
info (Optional) Displays detailed LACP channel information.
type (Optional) Name of the feature-related parameter; valid values are
auxiliaryvlan, cops, dot1qtunnel, gmrp, gvrp, jumbo, protocol, qos,
rsvp, spantree, trunk.
statistics (Optional) Displays LACP statistics.
channel_id (Optional) Number of the channel; valid values are from 769 to 896.
mac (Optional) Specifies MAC information about the channel.
hash Displays the outgoing port used in a channel for a specific add re ss or Layer
4 port number.
src_ip_addr Source IP address.
dest_ip_addr (Optional) Destination IP address.
src_mac_addr Source MAC address.
dest_mac_addr (Optional) Destination MAC address.
src_port Number of the source port; valid values are from 0 to 65535.
dest_port Number of the destination port; valid values are from 0 to 65535.
traffic Displays traffic utilization on channel ports.