2-1310
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show vtp
show vtp
To display devices and conflicts between devices in the VLAN Trunk Protocol (VTP) version 3 domain,
use the show vtp command.
show vtp {devices | conflicts}
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Examples This example shows information about devices in the VTP version 3 domain:
Console> show vtp devices
Retrieving information from the domain. Waiting 5 seconds.
VTP Feature Conf Revision Primary Server Device ID Device Description
------------ ---- -------- -------------- -------------- ----------------------
VLAN Yes 4 0005.3140.6400=0005.3140.6400 C6506-74-17>
VLAN Yes 4 0005.3140.6400 00d0.0227.9c00 C6509-74-24>
Console>
Table 2 -115 describes the fields in the show vtp devices comma nd ou tput.
devices Displays the VTP version 3 domain information.
conflicts Forces the display to show only devices that are in conflict in the VTP version 3
domain.
Table2-115 show vtp devices Command Output Fields
Field Description
VTP Feature Name of the VTP instance that propagates the VLAN database or
the MST configuration database (VLAN or MST).
Conf Indicates whether or not there is a conflict between the loca l device
for the feature (VLAN database or MST configuration) and the
answering device.
Revision Revision number of the specified VTP feature.
Primary Server MAC address of the primary server. If a device is configured with
a database that it originated, an equal sign (=) appears between the
Primary Server field and the Device ID field.
Device ID MAC address of the device.
Device Description Type of switch identified in the Device ID field.