2-1169
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show security acl
show security acl
To display the contents of the VACL that are currently configured or last committed to NVRAM and
hardware, use the show security acl command.
show security acl
show security acl [editbuffer]
show security acl info {acl_name | adjacency | all} [editbuffer [editbuffer_index] |
statistics [ace_index]]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines In the output for the show security acl command, the (Statistics) field displays whether or not statistics
are enabled for a specific ACL or VLAN. The field displays the following:
•Disable—Statistics are not enabled on the ACL.
•Enable—Statistics are enabled on the ACL.
•The numbers show the VLANS where per-VLAN statistics are enabled (“2-3” in the first example).
In the output for the show security acl info {acl_name | all} command, the redirect port for redirect
entries is shown with an asterisk (*) next to it.
editbuffer (Optional) Displays the VACLs in the edit buffer.
info Displays the contents of a VACL that were last committed to NVRAM and
hardware.
acl_name Name of the VACL to be displayed.
adjacency Displays adjacency information.
all Displays all ACL information.
editbuffer_index (Optional) Name of the edit buffer index.
statistics (Optional) Displays statistics for the specified ACL.
ace_index (Optional) Name of the ACE index in the ACL list.