2-938
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show log
show log
To display the error log for the system or a specific module, use the show log command.
show log [mod]
show log dump [-count]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines To display the contents of ASIC error messages as soon as they are received from SLCP or LCP, see the
set logging server command.
You can use the dump keyword to display log dump information generated when certain events occur,
such as memory corruption.
Examples This example shows a partial display of the output from the show log command:
Console> show log
Network Management Processor (ACTIVE NMP) Log:
Reset count: 10
Re-boot History: Mar 22 2000 10:34:09 0, Mar 17 2000 15:35:11 0
Mar 13 2000 17:40:16 0, Mar 13 2000 13:14:08 0
Mar 13 2000 11:57:30 0, Feb 24 2000 10:04:18 0
Bootrom Checksum Failures: 0 UART Failures: 0
Flash Checksum Failures: 0 Flash Program Failures: 0
Power Supply 1 Failures: 0 Power Supply 2 Failures: 0
Swapped to CLKA: 0 Swapped to CLKB: 0
Swapped to Processor 1: 0 Swapped to Processor 2: 0
DRAM Failures: 0
Exceptions: 0
Last software reset by user: 3/13/2000,17:39:00
EOBC Exceptions/Hang: 0
Heap Memory Log:
Corrupted Block = none
mod (Optional) Number of the module for which the log is displayed.
dump Displays dump log information.
-count (Optional) Number of dump log entries to display.