2-422
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set mls netflow-entry-create
set mls netflow-entry-create
To specify the VLANs on which you can enable or disable the creation of NetFlow entries, use the set
mls netflow-entry-create command.
set mls netflow-entry-create {enable | disable} vlan_list
Syntax Description
Defaults This command is disabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines The status of the creation of NetFlow entries on specific VLANs (whether this feature is enabled or
disabled) is displayed as part of the show mls command output. The VLANs that have entry creation
enabled are displayed as part of the VLANs that have the bridged flow statistics feature enabled.
NetFlow entries on the specified VLANs are not created until you enter the set mls
netflow-per-interface enable command.
Related Commands set mls netflow-per-interface
show mls
enable Specifies that NetFlow entry creation can be enabled on the specified
VLANs.
disable Specifies that NetFlow entry creation cannot be enabled on the specified
VLANs.
vlan_list VLAN numbers; valid values are from 1 to 4094.