2-394
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set logging callhome smtp-server
set logging callhome smtp-server
To designate an IP address as an SMTP server used by the CallHome feature, use the set logging
callhome smtp-server command.
set logging callhome smtp-server IP_addr
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines You must enter this command for each SMTP server.
You can configure a maximum of three SMTP servers.
Examples This example shows how to SMTP server with the IP address 172.16.8.19:
Console> (enable) set logging callhome smtp-server 172.20.8.16
Included 172.20.8.16 in the table of callhome SMTP servers.
Console> (enable)
Related Commands clear logging callhome smtp-server
set logging callhome
set logging callhome destination
set logging callhome from
set logging callhome reply-to
set logging callhome severity
show logging callhome
show logging callhome smtp-server
IP_addr IP address of the SMTP server.