2-1156
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show qos status
show qos status
To display if QoS is enabled on the switch, use the show qos status command.
show qos status
Syntax Description This command has no keywords or arguments.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Examples This exampl e shows how to display if QoS is enabled on the switch:
Console> (enable) show qos status
Qos is enabled on this switch.
DSCP rewrite has been globally disabled.
Console> (enable)
Related Commands set qos
set qos dscp-rewrite