2-347
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set image-verification
set image-verification
To ensure the integrity of a downloaded image, use the set image-verification command.
set image-verification [boot | copy | reset] {enable | disable}
Syntax Description
Defaults The image verification feature is disabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines You can configure the image verification feature to work when the system is booting, after the image has
been copied, or before a system resets. If you enable or di sabl e t he i mag e verificatio n f eat ur e w itho ut
specifying the boot keyword, the copy keyword, or the reset keyword, all three are enabled or disabled.
Examples This example shows how to enable the image verification feature at reset time:
Console> (enable) set image-verification reset enable
Console> (enable)
This example shows how to disable the image verification feature at copy t im e:
Console> (enable) set image-verification copy disable
Console> (enable)
Related Commands show image-verification
boot (Optional) Specifies image verification at boot time.
copy (Optional) Specifies image verification at copy time.
reset (Optional) Specifies image verification at reset time.
enable Enables image verification.
disable Disables image verification.