2-369
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set kerberos realm
set kerberos realm
To map the name of a Kerberos realm to a DNS domain name or a host name, use the set kerberos realm
command.
set kerberos realm {dns_domain | host} kerberos_realm
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines You can map the name of the Kerberos realm to a DNS domain name or a host name by entering the set
kerberos realm command. The information entered with this command is stored in a table with one
entry for each Kerberos realm. The maximum number of entries in the table is 100.
You must enter Kerberos realms in uppercase characters.
Examples This example shows how to map the Kerberos realm to a domain name:
Console> (enable) set kerberos realm CISCO CISCO.COM
Kerberos DnsDomain-Realm entry set to CISCO - CISCO.COM
Console> (enable)
Related Commands cl e ar ker b eros rea lm
set kerberos local-realm
show kerberos
dns_domain DNS domain name to map to Kerberos realm.
host IP address or name to map to Kerberos host realm.
kerberos_realm IP address or name of Kerberos realm.