2-897
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show gvrp statistics
show gvrp statistics
To view GVRP statistics for a port, use the show gvrp statistics command.
show gvrp statistics [mod/port]
Syntax Description
Defaults The default is, that if you do not specify a VLAN, statistics for V LAN 1 a re s hown.
Command Types Switch command.
Command Modes Normal.
Examples This example shows how to display GVRP statistics for module 2, port 1:
Console> show gvrp statistics 2/1
GVRP enabled
GVRP statistics for port 2/1:
Total valid pkts rcvd: 18951
Total invalid pkts recvd 0
General Queries recvd 377
Group Specific Queries recvd 0
MAC-Based General Queries recvd 0
Leaves recvd 14
Reports recvd 16741
Queries Xmitted 0
GS Queries Xmitted 16
Reports Xmitted 0
Leaves Xmitted 0
Failures to add GDA to EARL 0
Topology Notifications rcvd 10
GVRP packets dropped 0
Console>
Table 2 -35 describes the fields in the show gvrp statistics output.
mod/port (Optional) Number of the module and port on t he mo dul e.
Table2-35 show gvrp statistics Command Output Fields
Field Description
GVRP Enabled Status of whether or not GVRP is enabled or disabled.
Total valid pkts rcvd Total number of valid GVRP packets received.
Total invalid pkts recvd Total number of invalid GVRP packets received.
General Queries recvd Total number of GVRP general queries received.
Group Specific Queries
recvd Total number of GVRP group-specific queries received.