2-321
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set feature mdg
set feature mdg
To enable or disable the multiple default gateway feature, use the set feature mdg command.
set feature mdg {enable | disable}
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines If you enable the multiple default gateway feature, the Catalyst 6500 series switch pings the default
gateways every 10 seconds to verify that the gateways are still available.
Examples This example shows how to enable the multiple default gateway feature:
Console> (enable) set feature mdg enable
Multiple Gateway feature enabled.
Console> (enable)
This example shows how to disable the multiple default gateway feature:
Console> (enable) set feature mdg disable
Multiple Gateway feature disabled.
Console> (enable)
enable Enables the multiple default gateway.
disable Disables the multiple default gateway.