2-933
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show lda
show lda
To display the ASLB configuration information, use the show lda command.
show lda [committed | uncommitted]
show lda mls entry
show lda mls entry [destination ip_addr_spec] [source ip_addr_spec] [protocol protocol]
[src-port src_port] [dst-port dst_port] [short | long]
show lda mls statistics count
show lda mls statistics entry
show lda mls statistics entry [destination ip_addr_spec] [source ip_addr_spec]
[protocol protocol] [src-port src_port] [dst-port dst_port]
Syntax Description
Defaults The default displays MLS entry information in long form at.
Command Types Switch command.
Command Modes Normal.
committed (Optional) Views committed configuration information.
uncommitted (Optional) Views configuration information that has not been committed.
mls entry Displays the ASLB MLS entries.
destination
ip_addr_spec (Optional) Full destination IP address or a subnet address in these form ats: ip_addr,
ip_addr/netmask, or ip_addr/maskbit.
source
ip_addr_spec (Optional) Full source IP address or a subnet address in these formats: ip_addr,
ip_addr/netmask, or ip_addr/maskbit.
protocol
protocol (Optional) Specifies additional flow information (protocol family and protocol port
pair) to be matched; valid values include tcp, udp, icmp, or a decimal number for
other protocol families.
src-port
src_port (Optional) Specifies the number of the TCP/UDP source port (decimal). Used with
dst-port to specify the port pair if the protocol is tcp or udp. 0 indicates “do not
care.”
dst-port
dst_port (Optional) Specifies the number of the TCP/UDP destination port (decimal). Used
with src-port to specify the port pair if the protocol is tcp or udp. 0 indicates “do not
care.”
short | long (Optional) Specifies the width of the display.
count Displays the number of active ASLB MLS entries.
mls statistics
entry Displays statistics information.