2-883
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show fabric status
show fabric status
To display the integrated switch fabric status and forwarding speed, use the show fabric stat us
command.
Syntax Description This command has no keywords or arguments.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines The integrated 720 Gbps switch fabric is supported only on the Supervisor Engine 720.
Note For software release 8.3(4) and later releases, the show fabric status command will not indicate the
fabric speed.
Examples Console> show fabric status
Mod Speed Fabric
status
--- ----- -------
5 20G active
Console> (enable)
Related Commands se t syste m c rossbar-fallback
set system switchmode allow
show fabric channel