2-1042
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port capabilities
show port capabilities
To display the capabilities on the ports, use the show port capabilities command.
show port capabilities [mod[/port]]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a mod value, the ports on all modules are shown.
If you do not specify a port value, all the ports on the module are shown.
Examples This example shows how to list the port capabilities on a specific module and port:
Console> show port capabilities 1/1
Model WS-X6548-RJ-45
Port 1/1
Type 10/100BaseTX
Auto MDIX yes
AuxiliaryVlan 1..4094,untagged,dot1p,none
Broadcast suppression percentage(0-100)
Channel yes
COPS port group not supported
CoS rewrite yes
Dot1q-all-tagged yes
Dot1x yes
Duplex half,full
Fast start yes
Flow control receive-(off,on),send-(off)
Inline power no
Jumbo frames yes
Link debounce timer yes
Link debounce timer delay no
Membership static,dynamic
Port ASIC group 1/1-48
Port VLAN Mapping Group:1/1-48 Maximum Allowed Mappings:32
QOS scheduling rx-(1p1q0t),tx-(1p3q1t)
Security yes
SPAN source,destination
Speed auto,10,100
Sync restart delay no
ToS rewrite no
mod (Optional) Number of the module.
port (Optional) Number of the port on the module.