2-547
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set pvlan
set pvlan
To bind the isolated or community VLAN to the primary VLAN and assign the isolated or community
ports to the private VLAN, use the set pvlan command.
set pvlan primary_vlan {isolated_vlan | community_vlan | twoway_community_vlan}
[mod/port | sc0]
Caution We recommend that you read and understand the “Configuring VLANs” cha pter in t he Ca talyst 6500
Series Software Configuration Guide before using this command.
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines You must set the primary VLAN, isolated VLAN, and community VLANs using the set vlan pvlan-type
pvlan_type command before making the association with the set pvlan command.
Each isolated or community VLAN can have only one primary VLAN associated with it. A primary
VLAN may have one isolated or multiple community VLANs associated to it.
Although you can configure sc0 as a private port, you cannot configure sc0 as a promiscuous port.
primary_vlan Number of the primary VLAN.
isolated_vlan Number of the isolated VLAN.
community_vlan Number of the community VLAN.
twoway_community_vlan Number of the two-way community VLAN.
mod/port (Optional) Module and port numbers of the isolated or community
ports.
sc0 (Optional) Specifies the inband port sc0.