2-977
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show mls entry cef
This example shows how to display adjacency information:
Console> (enable) show mls entry cef ip adjacency
Mod: 16
Destination-IP: 127.0.0.21 Destination-Mask: 255.255.255.255
FIB-Type: resolved
AdjType NextHop-IP NextHop-Mac Vlan Encp Tx-Packets Tx-Octets
-------- --------------- ----------------- ---- ---- ------------ -------------
connect 127.0.0.21 00-00-12-00-00-00 0 ARPA 0 0
Mod: 16
Destination-IP: 46.0.0.10 Destination-Mask: 255.255.255.255
FIB-Type: resolved
AdjType NextHop-IP NextHop-Mac Vlan Encp Tx-Packets Tx-Octets
-------- --------------- ----------------- ---- ---- ------------ -------------
connect 46.0.0.10 00-00-0c-42-00-0a 46 ARPA 4889030 224895380
Console> (enable)
Table 2 -52 describes the possible fields in the show mls entry cef command output.
Table2-52 show mls entry cef Command Output Fields
Field Description
Mod MSFC module number
Destination-IP
Destination-IPX Destination address (IP address or IPX network)
Destination-Mask Destination mask
FIB-Type FIB entry types are as follows:
•receive—Prefix associated with an MSFC interface
•connected—Prefix associated with a connected network
•resolved—Prefix associated with a valid next-hop address
•drop—Drop packets associated with this prefix
•wildcard—Match-all entry (drop or MSFC redirect)
•default—Default route (wildcard will point to default route)
NextHop-IP
NextHop-IPX Next-hop address (IP address or IPX network)
Weight Next-hop load-sharing weight
AdjType Adjacency types are as follows:
•connect—Complete rewrite information
•drop, null, loopbk—Drop adjacency
•frc drp—Drop adjacency due to ARP throttling
•punt—Redirect to MSFC for further processing
•no r/w—Redirect to MSFC because rewrite is incomplete
NextHop-Mac Next-hop destination MAC address
Vlan Next-hop destination VLAN