2-1046
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port capabilities
Related Commands set port broadcast
set port channel
set port security
set port speed
set spantree portfast
set trunk
show port
show port voice active
Sync restart delay Status of whether the port supports the synchronization restart delay
function (yes, no).
ToS rewrite Status of whether the port supports ToS rewrite (IP-Precedence).
Trunk encap type2Trunk encapsulation type (ISL, 802.1Q, 802.10, or no).
Trunk mode2Trunk administrative status of the port (on, off, auto, desirable,
nonegotiate, or no).3
UDLD Status of whether the port is UDLD-capable or not.
1. This field will change depending on the module configuration.
2. This field is applicable to the 48-port 10/100BASE-TX switching services-configured module and the 24-port FXS
analog station interface services-configured module.
3. “No” means that the port is trunk incapable.
Table2-71 show port capabilities Command Output Fields (continued)
Field Description