2-890
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show garp timer
show garp timer
To display all the values of the General Attribute Registration Protocol (GARP) timers, use the show
garp timer command.
show garp timer
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines You must maintain the following relationship for the various timer values:
•Leave time must be greater than or equal to three times the join time.
•Leaveall time must be greater than the leave time.
Caution Set the same GARP application (for example, GMRP and GVRP) timer values on all Layer2-connected
devices. If the GARP timers are set differently on the Layer 2-connected devices, GARP applications
will not operate successfully.
Note The modified timer values are applied to all GARP application (for example, GMRP and GVRP) timer
values.
Examples This example shows how to display all the values of the GARP timers:
Console> (enable) show garp timer
Timer Timer Value (milliseconds)
-------- --------------------------
Join 200
Leave 600
LeaveAll 10000
Console> (enable)