2-1152
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show qos rsvp
show qos rsvp
To display RSVP information, use the show qos rsvp command.
show qos rsvp {info | flow-info}
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines The maximum number of RSVP flows displayed in the show qos rsvp flow-info command output are as
follows:
•1024 for switches configured with the Supervisor Engine 1 with Lay er 3 Sw itchi ng E ngin e
Policy Feature Card (WS-F6K-PFC).
•1056 for systems configured with the Supervisor Engine 2 with Layer 3 Swit ching Engine II (PFC2)
Examples This example shows how to display RSVP status information:
Console> (enable) show qos rsvp info
RSVP disabled.
RSVP policy timeout set to 30 minutes.
RSVP local policy set to forward.
Console> (enable)
This example shows how to display RSVP flow information:
Console> (enable) show qos rsvp flow-info
RSVP enabled. Only RSVP qualitative service supported.
RSVP policy timeout set to 30 minutes.
Flow # SrcAddr DstAddr SrcPort DstPort Prot DSCP Time Valid
------ --------------- --------------- ------- ------- ---- ---- -----------
1 172.21.23.34 177.23.45.67 3001 3101 UDP 6 30
2 172.21.23.34 177.23.45.67 3002 3102 UDP 4 15
3 172.21.23.34 177.23.45.67 3003 3103 TCP 2 68
4 172.21.34.67 177.68.89.23 4004 4005 UDP 1 23
Console> (enable)
Related Commands clear qos policer
set qos rsvp
info Displays RSVP status information.
flow-info Displays RSVP flow information.