2-825
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show channel group
show channel group
To display EtherChannel group status information, use the show channel group command.
show channel group [admin_group] [info | statistics]
show channel group [admin_group] [info [type]]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify the admin_group value, EtherChannel information is shown for all administrative
groups.
If you enter the optional info type, the specified feature-related parameters are displayed in the output.
Examples This example shows how to display Ethernet channeling informati on for al l ad mi nistra tive groups:
Console> show channel group
Admin Group Ports
----------- -----------------------------------------------
7 1/1-2
Console>
This example shows how to display Ethernet channeling information for a spe cific gr oup :
Console> show channel group 154
Admin Port Status Channel Channel
group Mode id
----- ----- ---------- --------- --------
154 1/1 notconnect on 769
154 1/2 connected on 769
Admin Port Device-ID Port-ID Platform
group
----- ----- ------------------------------ ------------------------- ----------
154 1/1
154 1/2 066510644(cat26-lnf(NET25)) 2/1 WS-C5505
Console>
admin_group (Optional) Number of the administrative group; valid v alues ar e fr om 1to 1024.
info (Optional) Displays group information.
statistics (Optional) Displays statistics about the group.
type (Optional) Displays feature-related parameters; valid values are spantree, trunk,
protcol, gmrp, gvrp, qos, rsvp, cops, dot1qtunnel, auxiliaryvlan, and jumbo.