2-179
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands clear vtp pruneeligible
clear vtp pruneeligible
To specify which VLANs in the VTP domain are ineligible for pruning, use the clear vtp pruneeligible
command.
clear vtp pruneeligible vlans...
Syntax Description
Defaults The default is VLANs 2 through 1005 are eligible for prun ing.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines VTP pruning causes information about each pruning-eligible VLAN to be removed from VTP updates
if no stations belong to that VLAN out a particular switch port. Use the set vtp command to enable VTP
pruning.
By default, VLANs 2 through 1000 are pruning eligible. Use the clear vtp pruneeligible command to
make VLANs pruning ineligible.
If VLANs are pruning ineligible, use the set vtp pruneeligible command to make the VL ANs pru ning
eligible again.
Examples This example shows how to make VLANs 200 through 500 pruning ineli gible :
Console> (enable) clear vtp pruneeligible 200-500
Vlans 1,200-500,1001-1005 will not be pruned on this device.
VTP domain Company modified.
Console> (enable)
Related Commands se t v tp
set vtp pruneeligible
show vtp domain
vlans... Number of VLANs to make pruning ineligible; valid values are from 1 to 1005.