2-130
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
clear security acl cram
clear security acl cram
To disable compression and reordering of ACL masks (CRAM) in automatic mode, use the clear
security acl cram command.
clear security acl cram {auto}
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines The CRAM feature can be run in automatic or manual mode. The clear security acl cram auto
command disables automatic mode. Automatic mo de executes the CRAM feature whenever the TCAM
is full or whenever a specified CRAM timer interval has elapsed.
Entering this command also returns the CRAM timer back to the default timer interval (300 seconds). If
you reenable CRAM by entering the set security acl cram auto command, the default timer interval
takes effect.
Note With software release 8.4(1), the CRAM feature is only supported for security A CLs. The CRAM fea ture
works for QoS ACLs but you cannot specifically run the feature on QoS ACLs.
Examples This example shows how to disable CRAM in automatic mode:
Console> (enable) clear security acl cram auto
Cram auto mode disabled.
Console> (enable)
Related Commands set security acl cram
show security acl cram
auto Disables CRAM in automatic mode.