2-1102
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port trunk
show port trunk
To display port trunk information, use the show port trunk command.
show port trunk [mod[/port]]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a mod valu e, th e ports on a ll mo dules are sho wn. If you do not sp ecify a port value,
all the ports on the module are shown.
Examples This example shows how to display trunking information for a sp ecific p ort:
Console> (enable) show port trunk 4/5
* - indicates vtp domain mismatch
Port Mode Encapsulation Status Native vlan
-------- ----------- ------------- ------------ -----------
4/5 nonegotiate dot1q trunking 1
Port Vlans allowed on trunk
-------- ---------------------------------------------------------------------
4/5 1-1005
Port Vlans allowed and active in management domain
-------- ---------------------------------------------------------------------
4/5 1-3,1003,1005
Port Vlans in spanning tree forwarding state and not pruned
-------- ---------------------------------------------------------------------
4/5 1005
Console> (enable)
mod (Optional) Number of the module.
port (Optional) Number of the port on the module.