2-1072
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port inlinepower
show port inlinepower
To display the port power administration and operational status, use the show port inlinepower
command.
show port inlinepower [mod[/port]] [detail]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines An inline power-capable device can still be detected even if the inline power mode is set to off.
The Operational (Oper) status field descriptions are as follows:
•on—Power is being supplied by the port.
•off—Power is not being supplied by the port.
•denied—The system does not have enough available power for the port; power is not being supplied
by the port.
•faulty—The port is unable to provide power to the connected device.
Examples This example shows how to display the inline power for multiple ports on a specific module:
Console> show port inlinepower 6/1
Configured Default Inline Power allocation per port: 15.400 Watts (0.36
Amps @42V)
Total inline power drawn by module 4: 33.934 Watts ( 0.807 Amps @42V)
Port InlinePowered PowerAllocated Device IEEE class
From PS To PD
Admin Oper mWatts mWatts
----- ------ ------ ------- ------- ---------- ----------
6/1 auto on 7079 6300 cisco none
Port MaximumPower ActualConsumption
mWatts mWatts
----- ------------ -----------------
6/1 15400 6300
Console>
mod (Optional) Number of the module.
port (Optional) Number of the port on the module.
detail (Optional) Displays detailed inline power information.