2-707
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set spantree mst maxhops
set spantree mst maxhops
To set the spanning tree hop count, use the set spantree mst maxhops command.
set spantree mst maxhops maxhops
Syntax Description
Defaults The bridge forward delay default is 20 seconds for all instances.
Command Types Switch command.
Command Modes Privileged.
Examples This example shows how to set the maximum number of hops:
Console> (enable) set spantree mst maxhops 20
Console> (enable)
Related Commands clear spantree mst
set spantree mst config
set spantree mst link-type
set spantree mst vlan
show spantree mst
show spantree mst config
maxhops Maximum number of hops. Valid values are 1 to 40.