2-97
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands clear port qos autoqos
clear port qos autoqos
To clear the automatic QoS configuration on a per-port basis, use the clear port qos au toqos command.
clear port qos mod/ports.. autoqos
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged mode.
Usage Guidelines The clear port qos autoqos command is supported on all ports supporting port-based automatic QoS
set commands. All QoS settings configured through the automatic QoS port-based comma nd revert back
to factory default settings, except for QoS ACLs. QoS ACLs created for automatic QoS purposes are
cleared through the global clear command.
All QoS ACLs mapped to the port are unmapped from the port, even if the QoS ACL is not related to
automatic QoS.
Examples This example shows how to clear the automatic QoS configuration on m odu le 3, port 1 :
Console> (enable) clear port qos 3/1 autoqos
Port based QoS settings will be restored back to factory defaults for port 3/1.
Do you want to continue (y/n) [n]? y
Port 3/1 autoqos settings have been cleared.
It is recommended to execute the "clear qos autoqos" global command if
not executed previously to clear global autoqos settings.
Console> (enable)
Related Commands clear qos autoqos
set port qos autoqos
set qos autoqos
show port qos
show qos info
mod/ports.. Number of the module and ports on the module.