2-1077
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show port lacp-channel
show port lacp-channel
To display information about LACP channels by port or module number, use the show port
lacp-channel command.
show port lacp-channel [mod[/port]] [statistics]
show port lacp-channel [mod[/port]] info [type]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not enter a module or a port number, information about all modules is displayed.
If you enter the module number only, information about all ports on t he m odu le is disp layed.
For differences between PAgP and LACP, refer to the “Guidelines for Port Configuration” section of the
“Configuring EtherChannel” chapter of the Catalyst 6500 Series Switch Software Configuration Guide.
Examples This example shows how to display LACP channel information for all system modules:
Console> show port lacp-channel
Port Channel Admin Ch Partner Oper Partner
Mode Key Id Sys ID Port
----- --------- ----- ----- ----------------------------------- -----
2/1 active 143 768 1276,45-12-24-AC-78-90 5/1
2/2 active 143 768 1276,45-12-24-AC-78-90 5/2
----- --------- ----- ----- ----------------------------------- -----
4/3 passive 151 769 13459,89-BC-24-56-78-90 1/1
4/4 passive 151 769 13459,89-BC-24-56-78-90 1/2
----- --------- ----- ----- ----------------------------------- -----
4/7 passive 152 770 8000,AC-12-24-56-78-90 4/3
4/8 passive 152 770 8000,AC-12-24-56-78-90 4/4
----- --------- ----- ----- ----------------------------------- -----
Console>
mod[/port] (Optional) Number of the module and the port number on the module.
statistics (Optional) Displays the LACP channel statistics.
info Displays detailed LACP channel information.
type (Optional) Displays feature-related parameters; valid values are auxiliaryvlan, cops,
dot1qtunnel, gmrp, gvrp, jumbo, protocol, qos, rsvp, spantree, trunk.