Siemens 400 V / 210...590 A operating instructions 12-30

Parameter List						01.2004
PNU	Parameter Name in OP1			Range	# of Indices		read:		_/_
				[Unit]	Factory		write:		_/_
*:conf-P	Description			Value Texts	Settings
P696	CB Parameter 1			0 to 65535	−		3	/ H BR
2B8Hex	Communication Board parameter 1				0		3	/ H
	Refer to documentation of installed COM BOARD
	Setting instructions:
	• This parameter is relevant only if a Communication Board is
	configured and parameterized (P090 or P091 = 1)
	• The validity of the setting is monitored by the board.
	• If the value is not accepted by the COM BOARD, fault 80
	with fault value 5 is displayed.
	Type=O2;	PKW: 1HEX=1.0	PZD Gr.: 0
P697	CB Parameter 2			0 to 65535	−		3	/ H BR
2B9Hex	Communication Board parameter 2				0		3	/ H
	See P696
	Type=O2;	PKW: 1HEX=1.0	PZD Gr.: 0
P698	CB Parameter 3			0 to 65535	−		3	/ H BR
2BAHex	Communication Board parameter 3				0		3	/ H
	See P696
	Type=O2;	PKW: 1HEX=1.0	PZD Gr.: 0
P699	CB Parameter 4			0 to 65535	−		3	/ H BR
2BBHex	Communication Board parameter 4				0		3	/ H
	See P696
	Type=O2;	PKW: 1HEX=1.0	PZD Gr.: 0
P700	CB Parameter 5			0 to 65535	−		3	/ H BR
2BCHex	Communication Board parameter 5				0		3	/ H
	See P696
	Type=O2;	PKW: 1HEX=1.0	PZD Gr.: 0
P701	CB Parameter 6			0 to 65535	−		3	/ H BR
2BDHex	Communication Board parameter 6				0		3	/ H
	See P696
	Type=O2;	PKW: 1HEX=1.0	PZD Gr.: 0
P702	CB Parameter 7			0 to 65535	−		3	/ H BR
2BEHex	Communication Board parameter 7				0		3	/ H
	See P696
	Type=O2;	PKW: 1HEX=1.0	PZD Gr.: 0
P703	CB Parameter 8			0 to 65535	−		3	/ H BR
2BFHex	Communication Board parameter 8				0		3	/ H
	See P696
	Type=O2;	PKW: 1HEX=1.0	PZD Gr.: 0
P704	CB Parameter 9			0 to 65535	−		3	/ H BR
2C0Hex	Communication Board parameter 9				0		3	/ H
	See P696
	Type=O2;	PKW: 1HEX=1.0	PZD Gr.: 0
P705	CB Parameter 10			0 to 65535	−		3	/ H BR
2C1Hex	Communication Board parameter 10				0		3	/ H
	See P696
	Type=O2;	PKW: 1HEX=1.0	PZD Gr.: 0
P706	CB Parameter 11			0 to 65535	5		3	/ H BR
	Communication Board parameter 11				i001=0		3	/ H
2C3Hex	Indices: i001 - i005				i002=0
	See P696				i003=0
					i004=0
	Type=O2;	PKW: 1HEX=1.0	PZD Gr.: 0		i005=0

12-30	6SE7087-6CX86-2BA1 Siemens AG
	Operating Instructions SIMOVERT MASTERDRIVES AFE