Siemens 400 V / 210...590 A operating instructions 17-3

01.2004Technical Data

Supply system type	TN-C; 3/PEN
Mains voltage	3AC 400 V
Mains frequency	50 Hz / 60 Hz
Rated operating voltage	3 AC 380 (-20 %) V to 3AC 460 (+5 %) V)
Rated current	210 A, 260 A, 315 A, 370 A, 510...590 A
Power loss	CleanPower filter		Approx. 300 Watt (construction type G)
			Approx. 500 Watt (construction type J)
	AFE basic mains module		Negligible
	AFE reactor		See below
Control voltage / auxiliary supply	DC24, AC230 V
Incoming fuse	See operating manual for AFE chassis units
Short-circuit strength	Depends on incoming fuse
Protection class to EN50178	I
Protective measures	Cover with optionally large surface against direct contact,
	as chassis unit by enclosure to DIN EN 60204-1
	in case of indirect contact automatic disconnection by overcurrent
	protective device in the TN system
Operating mode	Continuous operation
Inputs/outputs	Mains incoming feeder at contactor K1
	Mains outgoing feeder to AFE reactor at reactor terminals of line
	commutating reactor via cable lug M12 or conductor bar
Table 17-2	Electrical technical data
Dimensions	CleanPower filter
	Mounting space:
	W: 502 mm	H: 700 mm		D: 377 mm
	Maximum mounting dimensions with clearance for connections
	W: 510 mm	H: 1300 mm		D: 380 mm
	AFE basic mains module
	Mounting space:
	W: 342 mm	H: 700 mm		D: 377 mm
Weight	AFE basic mains module			16 kg
	CleanPower filter (210...590 A)			44 kg ... 78 kg
	(ready assembled:			60 kg ... 94 kg)
Surface	Housing sendzimized
Tank	Mounting plate special housing
Table 17-3	Mechanical technical data

The machine control is manufactured in accordance with DIN EN 60439-1, also taking into account DIN EN 60204-1. In the delivery state, the protection against indirect contact for the machine control is afforded by automatic disconnection in the TN system. If protection against indirect contact with the equipment is to be afforded by a different system, the circuit configuration must be adapted accordingly.

DIN EN 60204-1 specifies that only electricians and/or other personnel with proper training in handling electrical circuitry may have access to the internal components of the electrical system.

Siemens AG 6SE7087-6CX86-2BA1	17-3
SIMOVERT MASTERDRIVES AFE Operating Instructions