Siemens 400 V / 210...590 A General visualization parameters, R001 Operating status

Parameter List 01.2004

12.1General visualization parameters

PNU		Parameter Name in OP1					Range	# of Indices	read:		_/_
							[Unit]	Factory	write:		_/_
*:conf-P		Description					Value Texts	Settings
r000		Operation Display						−	1 /UHABR
		Displays the operating status, fault and alarm messages
		See Section “Operator control" for a description
r001		Operating status						−	2 /UHABR
		Visualization parameter indicating the current operating state
1Hex		of the AFE
		Description
	0		=	AFE MLFB input			MLFB Input
	1		=	AFE initialization			Init. MLFB
	2		=	Hardware initialization			H/W Init
	3		=	Closed-loop control initialization			System Init
	4		=	Hardware settings (H)			H/W Setting
	5		=	Closed-loop control settings (A)			System Set.
	7		=	Fault			Fault
	8		=	Starting lockout			ON locked
	9		=	Ready for ON			Rdy ON
	10		=	DC-link precharging			Precharging
	11		=	Ready to run			Rdy Run
	14		=	Run			Operation
	18		=	Forming			Capacitor
	21		=	Downloading parameter settings ....			forming
		Analog output: 100 % with code number (PWE) = 16384					Download
		Type = O2;			PKW: 1HEX=1	PZD Gr.: 0
r004		Output Amps						−	2 /	BR
		AFE output current (fundamental r.m.s.)					[A]
4Hex		Note:		The displayed value corresponds to the current at
				the inverter (CT). The line current at the AFE input
				deviates from this value by the current component
				which flows through the filter capacitor.
		Analog output: 100 % with code number (PWE) = 4 * P072
		Type=O2;			PKW: 1HEX=0.1 A	PZD Gr.: 6
r006		DC Bus Volts						−	2 /	BR
		Actual DC-link voltage value					[V]
6Hex		Display quantity for the PMU and OP.
		Analog output: 100 % with code number (PWE) = 4*P071
		Type=I2;			PKW: 1HEX=1 V	PZD Gr.: 7
r010		AFE utilization						−	2 / BR
AHex		Thermal AFE utilization as a result of an I2t calculation of the					[%]
		output current.
		Loading the AFE with maximum current for
		• 30 seconds activates an alarm (P622) and for
		• 60 seconds to a reduction in the load current to 91 % of
			AFE rated current.
		Analog output: 100 % with code number (PWE) = 16384 %
		Type=O2;			PKW: 1HEX=1 %	PZD Group: 0

12-2	6SE7087-6CX86-2BA1 Siemens AG
	Operating Instructions SIMOVERT MASTERDRIVES AFE