Siemens 400 V / 210...590 A operating instructions X102 control, Possible cross- .5 mm 2 AWG

Connecting-Up and Wiring 01.2004

X102 control	The terminals on the control terminal strip are as follows:
terminal strip
		Terminal	Name	Function	Range
		25	Cannot be	Analog input 3	0 V to 5 V
			used
	26		Cannot be	Analog input 4	0 V to 5 V
			used
	27		Assigned	Analog input 1	0 V to ± 10 V
	28		Assigned	Reference potential for
				analog inputs 1, 3
		29		Digital output 3	Imax = 20 mA
		30	Assigned	Analog input 2	0 V to ± 10 V
	31		Assigned	Reference potential for
				analog inputs 2, 4
		32		Digital output 4	Imax = 20 mA
	33 *)			Reference potential for
				analog output 1,
				digital output 3,
				digital output 4
	34 *)			Analog output 1	0 V to 10 V
					Rating
					≤ 5 mA equals > 2 kΩ
	Possible cross-section: 1.5 mm2 (AWG 16)
	*) NOTE:
		To increase the noise immunity of the signals, an isolating amplifier should be
		connected between the analog output and measuring unit for cables > 4 m.
	Table 7-8		Control terminal strip X102

7-14	6SE7087-6CX86-2BA1 Siemens AG
	Operating Instructions SIMOVERT MASTERDRIVES AFE