Siemens 400 V / 210...590 A Replacing the capacitor battery, Capacitor battery weighs up to 30 kg

01.2004 Maintenance

15.2.4Replacing the capacitor battery

The unit is an assembly which consists of the DC link capacitors, the capacitor support and the DC link bus module.

Construction type G ♦ Remove the terminal for the balancing resistor (cable eye M6). ♦ Undo the mechanical mounting.

♦ Swing the capacitor battery out forwards and lift the unit at an angle of 45 ° out of the converter.

Construction type J The capacitor battery comprises three assemblies. Each assembly contains a capacitor support and a DC link bus module.

♦Undo the plug-in connections

♦Undo the mechanical fastening (three screws: Two left, one right)

Swing the capacitor sideways until it reaches the limit stop, lift the unit slightly and pull it forwards out of the converter.

CAUTION The capacitor battery weighs up to 30 kg!

Siemens AG 6SE7087-6CX86-2BA1	15-5
SIMOVERT MASTERDRIVES AFE Operating Instructions