Siemens 400 V / 210...590 A operating instructions 12-23

01.2004					Parameter List
PNU	Parameter Name in OP1			Range	# of Indices	read:		_/_
				[Unit]	Factory	write:		_/_
*:conf-P	Description			Value Texts	Settings
P618	DstCurrLimAct.			0 to 5002	3	3 /	BR
*	Destination of the status bit "Current limit active'				i001=0	3 /	BR
26AHex	(status word 2, Bit 18)				i002=0
	Note:	The active status (bit has H level) is output via the			i003=0
		terminal in inverted form (broken-wire proof).
	Parameter values, indices as for P600
	Type=L2; PKW: PKW format(HEX)=param.value		PZD Gr.: 0
P619	Dst Ext Fault 1			0 to 5002	3	3 /	BR
*	Destination of the status bit "External fault 1 active'				i001=0	3 /	BR
26BHex	(status word 2, bit 19)				i002=0
	Note:	The active status (bit has H level) is output via the			i003=0
		terminal in inverted form (broken-wire proof).
	Parameter values, indices as for P600
	Type=L2; PKW: PKW format(HEX)=param.value		PZD Gr.: 0
P620	Dst Ext Fault 2			0 to 5002	3	3 /	BR
*	Destination of the status bit "External fault 2 active'				i001=0	3 /	BR
26CHex	(status word 2, bit 20)				i002=0
	Notes:	• The active status (bit has H level) is output via			i003=0
		the terminal in inverted form (broken-wire
		proof).
		• The device accepts the fault after 200 ms
		provided that an ON command is active.
	Parameter values, indices as for P600
	Type=L2; PKW: PKW format(HEX)=param.value		PZD Gr.: 0
P621	Dst Ext Warning			0 to 5002	3	3 /	BR
*	Destination of the status bit "External alarm active'				i001=0	3 /	BR
26DHex	(status word 2, bit 21)				i002=0
	Note:	The active status (bit has H level) is output via the			i003=0
		terminal in inverted form (broken-wire proof).
	Parameter values, indices as for P600
	Type=L2; PKW: PKW format(HEX)=param.value		PZD Gr.: 0
P622	Dst.warn.i2tAFE			0 to 5002	3	3 /	BR
*	Destination of the status bit "Inverter overload alarm"				i001=0	3 /	BR
26EHex	(status word 2, bit 22); cf. r010 (AFE utilization)				i002=0
	Note:	The active status (bit has H level) is output via the			i003=0
		terminal in inverted form (broken-wire proof).
	Parameter values, indices as for P600
	Type=L2; PKW: PKW format(HEX)=param.value		PZD Gr.: -
P623	DstFltOvertmpAFE			0 to 5002	3	3 /	BR
*	Destination of the status bit "Inverter overtemperature fault"				i001=0	3 /	BR
26FHex	(status word 2, bit 23)				i002=0
	Note:	The active status (bit has H level) is output via the			i003=0
		terminal in inverted form (broken-wire proof).
	Parameter values, indices as for P600
	Type=L2; PKW: PKW format(HEX)=param.value		PZD Gr.: 0

Siemens AG 6SE7087-6CX86-2BA1	12-23
SIMOVERT MASTERDRIVES AFE Operating Instructions