(8)Remove the two cup B M4x12 Taptite screws and two cup S M4x8 Taptite screws.
(9)Release the one Hook on the front side, two Hooks on the bottom and the two Hooks on the back side, and then remove the Side cover R ASSY.
Note:
When removing the Side cover R ASSY, be careful not to damage section “A”.
Taptite, cup S M4x8
Hooks
9a
Side cover R ASSY
9b
“A” Hook
<Right side>
Hooks
Taptite, cup S M4x8 | Taptite, cup B M4x12 |
|
Fig.
(10) Disconnect the three Connectors (CN1, CN2, CN4) from the Driver PCB ASSY.
Driver PCB ASSY
CN4
Document scanner unit ASSY
<Left side>
Main PCB ASSY
CN2CN1
Fig.
Confidential |