<Function>
This function allows you to check the management information of the software programs such as version information, check sum.
<Operating Procedure>
(1)Press the 2 and 5 buttons in this order in the initial stage of the maintenance mode. The machine displays each of terms described below on the LCD.
(2)Press the 
or 
button to check the next term.
LCD | Description |
|
|
TOTAL: Ver A* | Main firmware version information (Revision information) |
|
|
PCL : Ver1.00* | Sub firmware (PCL/PS) version information (ROM size) |
|
|
ENG : Ver1.01 | Engine firmware version information |
|
|
NET : Ver1.00 | Network version information |
|
|
PICT: Ver1.00 | PictBridge version information |
|
|
B0608071049:5708* | Boot program creation date & check sum information |
|
|
U0612271600:7B0A* | Main firmware creation date & check sum information |
|
|
P0612271602:BD40* | Sub firmware (PCL/PS) creation date & check sum |
| information |
|
|
- How to display the check sum information
Terms displayed with “*” have the check sum information as well. Press the OK button when its version information is displayed on the LCD. Press the OK button again to go back to the version information display. Press the 
or 
buttons to check the next term.
Note:
If you press the OK button when each version information of Engine, Network and PictBridge is displayed on the LCD, you cannot check the check sum information.
(3)To terminate this operation, press the Stop/Exit button. The machine beeps for one second and returns to the initial stage of the maintenance mode.
Confidential |