(5)Turn the Panel unit upside down, and then disconnect the Connector (CN4) from the Panel PCB ASSY.
(6)Release the Lock and disconnect the Flat cable (CN3) from the Panel PCB ASSY.
Note:
-After disconnecting the flat cable(s), check that each cable is not damaged at its end or
-When connecting the flat cable(s), do not insert it at an angle. After insertion, check that the cable is not at an angle.
CN4
Panel PCB ASSY
CN3 (Flat cable)
CN3 (Flat cable)
Lock
Fig.
(7) Release the eight Hooks to remove the Panel PCB ASSY from the Panel unit.
Panel PCB ASSY
Hooks
Hooks
Hooks
Panel unit
Hooks
Fig.
Confidential |