(17)Put the Flat cable through the Core, and then connect the three Connectors (CN14, CN16, CN21) and one Flat cable (CN17) into the Main PCB ASSY.
Note:
When connecting the Flat cable(s), do not insert it at an angle. After insertion, check that the cable is not at an angle.
Document scanner unit ASSY 
Core
Main PCB ASSY
Flat cable (CN17) 
CN16
CN14
CN21
<Left side>
Fig.
(18)Catch the Hooks of the Side cover R ASSY with the main body in the order of 18a to 18e and fix the Side cover R ASSY with the two cup B M4x12 Taptite screws and two cup S M4x8 Taptite screws.
*1 Tightening Note:
When tightening the screw, slowly turn it counterclockwise (in the direction to loosen the screw) with your hand until you feel that the screw is a little dropped in the hole. Then, slightly turn it clockwise (in the direction to tighten the screw) with your hand and tighten it according to the specified torque with a screwdriver.
| Taptite, cup S M4x8 | ||
| 18a | Hooks | |
| 18b |
| |
| Side cover R ASSY | ||
Hook | 18d |
| |
| 18e |
| ||
| 18c |
| ||
|
| ||
| <Right side> | ||
| Hooks |
| |
Taptite, cup S M4x8 | Taptite, cup B M4x12 |
| |
(Tightening torque: 1.20 | ±0.1 N m) *1 | ||
| |||
Fig.
Confidential |