Error code B0SCANNER ERROR
Harness for CCD unit is not connected correctly.
* This error is indicated on the LCD in the maintenance mode.
Step | Cause | Remedy |
|
|
|
1 | Harness for CCD unit not | Reconnect the harness for the CCD unit correctly. |
| connected correctly. |
|
2 | Scanner harness broken | Replace the FFC cable ASSY. |
3 | Main PCB failure | Replace the main PCB ASSY. |
|
|
|
Error code B2SCANNER ERROR
Gain control data level error for CCD unit scanning.
* This error is indicated on the LCD in the maintenance mode.
Step | Cause | Remedy |
1 | CCD unit failure | Replace the CCD unit. |
|
|
|
2 | Main PCB failure | Replace the main PCB ASSY. |
Error code B3SCANNER ERROR
Detection error of the scanning area on the left end
* This error is indicated on the LCD in the maintenance mode.
Step | Cause | Remedy |
|
|
|
1 | CCD unit failure | Replace the CCD unit. |
2 | Main PCB failure | Replace the main PCB ASSY. |
Error code B4SCANNER ERROR
Detection error of the scanning area on the right end
* This error is indicated on the LCD in the maintenance mode.
Step | Cause | Remedy |
|
|
|
1 | CCD unit failure | Replace the CCD unit. |
2 | Main PCB failure | Replace the main PCB ASSY. |
Confidential |