The machine initializes the parameter, user switches, worker switches and assurance mode switch settings registered in the EEPROM, to the initial values. Entering function code 01 initializes almost all of the EEPROM areas, but entering 91 does not initialize some areas, as listed below.
Function code
Data item
0191
Worker switch (Refer to Appendix 1.)
Remote activation code
Registered message for cover page comment
Forwarding / paging number, PIN number
Outside line number Telephone function registration
Speed dialing Group dialing
These will be initialized.
All of these will be
initialized.
These will not be
initialized.
Note:
If you replace the main PCB with the one used for any other machine, carry out this procedure and then customize the EEPROM
<Operating Procedure>
(1)Press the 0 and 1 buttons (or the 9 and 1 buttons according to your need) in this order in the initial stage of the maintenance mode.
The “PARAMETER INIT” will appear on the LCD.
(2)Upon completion of parameter initialization, the machine beeps for one second and returns to the initial stage of the maintenance mode.
Confidential |