Brother MFC-9840CDW, DCP-9045CDN manual < WSW45

< WSW45 >

Selector No.	Function		Setting and Specifications
		No. 1	2	3
		0	0	0: No automatic drawing-in
1		0	0	1: 1 sec.
	Delay time from when	0	1	0: 2 sec.
		0	1	1: 3 sec.
	documents are set until the
3	ADF starts drawing them in	1	0	0: 4 sec.
		1	0	1: 5 sec.
		1	1	0: 6 sec.
		1	1	1: 7 sec.
		No. 4	5	6
		0	0	0: No correction of reference
				voltage during standby
4	Periodical correction intervals of	0	0	1: 10 sec.
	the reference voltage to be	0	1	0: 30 sec.
applied to white level	0	1	1: 1 min.
6				compensation for document
	1	0	0: 3 min.
				scanning, during standby
	1	0	1: 5 min.
		1	1	0: 10 min.
		1	1	1: 30 min.
7	Standby position of the CCD	0: CCD home position
		1: Location of the white-level reference
	unit
		film
8	Line polarity reverse detection	0: No		1: Yes
	function

Note:

WSW45 is applicable only to flat head-type models.

-Selectors 1 through 3: Delay time from when documents are set until the ADF starts drawing them in

These selectors determine how long the ADF will delay automatic drawing-in of documents (to the scanning standby position) after you set them in the ADF, as well as determining whether or not the ADF automatically draws in documents.

-Selectors 4 through 6: Periodical correction intervals of the reference voltage applied to white level compensation for document scanning, during standby

These selectors set the correction intervals (in seconds) of the reference voltage to be applied to white level compensation for document scanning during standby, as well as determining whether or not the controller makes the reference voltage correction during standby. (Conventionally, the correction has been made immediately before the start of actual scanning)

This function takes effect in copying. Making the correction during standby may shorten the preparation time for copying.

Note:

Do not access these selectors.

App. 1-50 Confidential