8.13Side Plate LB

(1)Remove the three cup S M3x6 Taptite screws, cup B M4x12 Taptite screw and cup S M4x8 Taptite screw, and then remove the Side plate LB.

Taptite, cup S M4x8

Side plate LB

Taptite, cup B M4x12 (Tightening torque: 1.20 ±0.1 N m) *1

Taptite, cup S M3x6

<Left side>

Fig. 3-44

*1 Tightening Note:

When tightening the screw, slowly turn it counterclockwise (in the direction to loosen the screw) with your hand until you feel that the screw is a little dropped in the hole. Then, slightly turn it clockwise (in the direction to tighten the screw) with your hand and tighten it according to the specified torque with a screwdriver.

3-55

Confidential