This function is provided for service personnel in order to reset the counter of each periodical replacement part and count the number of replacement times when replacing the periodical replacement parts.
<Operating Procedure>
(1)Press the 3 and 9 buttons at the same time in the ready status.
(2)The “Reset Menu” will appear on the LCD. Select the
applicable periodical replacement part by pressing the 
or 
button and press the OK button.
< Periodical replacement parts are indicated on the LCD >
- Drum | - Belt Unit | - PF Kit MP - PF Kit 1 |
- PF Kit 2 | - Fuser | - Laser |
(3) When the OK button is pressed the “1. Reset 2. Exit” appears on the LCD. Press the 1 button if resetting the counter. If not, press the 2 button.
(4) Pressing the 1 button accepts that the machine implements the counter reset.
(5) The machine returns to the ready status.
Note:
-All periodical replacement parts are always indicated on the LCD even though their lives do not reach 0 %.
-The PF kit 2 is always indicated even though Tray 2 is not installed, or it is not supported for the model to be used.
-The machine returns to the ready state automatically if no panel operation is implemented for 60 seconds.
Confidential |