(3)Remove the bind B M3x10 Taptite screw, and then remove the LV fan duct from the Frame unit.

Frame unit

<Right side>

LV fan duct

Taptite, bind B M3X10

(Tightening torque: 0.80 ±0.1 N m) *1

Fig. 3-283

(4)Remove the three cup B M4x12 Taptite screws, and then remove the Belt unit drive motor ASSY from the Frame unit.

(5)Disconnect the Connector from the Belt unit drive motor ASSY.

Frame unit

<Right side>

Connector

Belt unit drive motor ASSY

Taptite, cup B M4x12

(Tightening torque: 1.20 ±0.1 N m) *1

Fig. 3-284

*1 Tightening Note:

When tightening the screw, slowly turn it counterclockwise (in the direction to loosen the screw) with your hand until you feel that the screw is a little dropped in the hole. Then, slightly turn it clockwise (in the direction to tighten the screw) with your hand and tighten it according to the specified torque with a screwdriver.

3-188

Confidential