WSW No.

Function

Refer to:

WSW37

Function setting 15

App. 1-42

WSW38

V.34 transmission settings

App. 1-43

WSW39

V.34 transmission speed

App. 1-44

WSW40

V.34 modem settings

App. 1-45

WSW41

ON-duration of the scanning light source

App. 1-47

WSW42

Internet mail settings

App. 1-48

WSW43

Function setting 21

App. 1-48

WSW44

Speeding up scanning-1

App. 1-49

WSW45

Speeding up scanning-2

App. 1-50

WSW46

Monitor of power ON/OFF state and parallel port kept at high

App. 1-51

WSW47

Switching between high- and full-speed USB

App. 1-52

WSW48

USB setup latency

App. 1-53

WSW49

End-of-copying beep and print in black

App. 1-54

WSW50

SDAA settings

App. 1-55

WSW51

Function setting 16

App. 1-56

WSW52

Function setting 17

App. 1-57

WSW53

Function setting 18

App. 1-58

WSW54

Function setting 19

App. 1-59

WSW55

Function setting 20

App. 1-60

WSW56

Function setting 21

App. 1-60

WSW57

Function setting 22

App. 1-61

WSW58

Function setting 23

App. 1-62

WSW59

Function setting 24

App. 1-62

WSW60

Not used.

App. 1-63

WSW61

Judgment of scanning light intensity stability 1

App. 1-63

WSW62

Judgment of scanning light intensity stability 2

App. 1-64

* Details of Worker switches

The details of the worker switches are described in Appendix 1 in which the user-accessible selectors of the worker switches are shaded.

<Operating Procedure>

(1)Press the 1 and 0 buttons in this order in the initial stage of the maintenance mode. The machine displays the “WSW00” on the LCD and becomes ready to accept a worker switch number.

(2)Enter the desired number from the worker switch numbers (01 through 59). The following appears on the LCD:

Selector 1

Selector 8

(3)To Enter a value to be set (0 or 1) use the and buttons to move the cursor to the desired position and enter the 0 or 1 button to change.

(4)Press the OK button. This operation saves the newly entered selector values onto the EEPROM and readies the machine for accepting a worker switch number.

(5)Repeat steps (2) through (4) until the modification for the desired worker switches is completed.

(6)Press the Stop/Exit button so that the machine beeps for one second and returns to the initial stage of the maintenance mode.

5-9

Confidential