(11)Remove the cup S M3x6 Taptite screw, and then remove the FG harness ADF from the Driver PCB shield.

(12)Remove the cup S M3x6 Taptite screw, and then remove the FG harness FB from the Driver PCB shield.

Document scanner unit ASSY

Driver PCB shield

FG harness ADF

Taptite, cup S M3x6

Taptite, cup S M3x6

FG harness FB

<Left side>

Fig. 2-16

(13)Disconnect the three Connectors (CN14, CN16, CN21) and Flat cable (CN17) from the Main PCB ASSY, and then pull out the Flat cable from the Core.

Note:

After disconnecting the Flat cable(s), check that each cable is not damaged at its end or short-circuited.

Document scanner unit ASSY

Core

Main PCB ASSY

Flat cable (CN17)

CN16

<Left side>

CN14

CN21

Fig. 2-17

2-13

Confidential