Error code 8A (T1)Jam Tray 1
Remove the jammed paper from Tray 1.
Error code 8B (LT)Jam Tray 2
Remove the jammed paper from Tray 2.
Error code 8C (MP)Jam MP Tray
Remove the jammed paper from Multi Purpose Tray and press start.
Paper jam in the appropriate tray
User Check
-Check if the paper is jammed in the appropriate tray. If jammed, remove it.
-Adjust the paper guide corresponding to the paper size.
-Check if too much paper is loaded in the tray.
Step | Cause | Remedy |
1 | Harness connection failure of | Check the harness connection of the registration |
| registration front sensor PCB | front sensor PCB ASSY in the appropriate tray, |
| ASSY | and reconnect it. |
2 | Paper feeding kit worn out | Replace the paper feeding kit of the appropriate |
| (MP/ T1/ LT) | tray. |
|
| |
|
|
|
3 | Registration front sensor PCB | (MP/ T1) Check the sensor performance following |
| failure (MP/ T1/ LT) | the procedure described in “Maintenance mode |
|
| |
|
| unit ASSY. |
|
| (LT) Check the sensor performance following the |
|
| procedure described in “Maintenance mode 32”. If |
|
| any problem occurs, replace the LT paper feed |
|
| frame unit. |
4 | Engine PCB failure | Replace the engine PCB ASSY. |
|
|
|
Confidential |