Selector No. | Function |
| Setting and Specifications | |||
|
|
|
|
|
| |
| Output of communications error |
|
|
|
| |
1 | report when transmission | 0: Enable | 1: Disable | |||
| verification report is disabled |
|
|
|
| |
|
|
|
|
|
| |
2 | CR motor torque variation | 0: Yes |
| 1: No | ||
reduction control (Not used.) |
| |||||
|
|
|
|
| ||
|
|
|
|
|
| |
|
| No. 3 | 4 |
|
| |
3 | Cordless handset microphone | 0 | 0: Middle (Default) | |||
0 | 1: Low | |||||
4 | volume | |||||
1 | 0: High | |||||
|
| |||||
|
| 1 | 1: Very high | |||
|
|
|
|
|
| |
|
| No. 5 | 6 | 7 |
| |
|
| 0 | 0 | 0: Microphone level 0 with | ||
5 |
|
|
|
| echo cancellation OFF | |
Main unit microphone level and | 0 | 0 | 1: Microphone level 1 with | |||
| ||||||
echo cancellation ON/OFF |
|
|
| echo cancellation ON | ||
7 | function (Not used.) | 0 | 1 | 0: Microphone level 2 with | ||
|
|
|
|
| echo cancellation ON | |
|
| 0 | 1 | 1: Microphone level 3 with | ||
|
|
|
|
| echo cancellation ON | |
|
|
| ||||
| Support between nearly empty | 0: Empty state detected when main unit | ||||
8 | → empty when main unit cover | cover opened | ||||
opened after nearly empty | 1: Nearly empty state maintained when | |||||
| ||||||
| detected (Not used.) | main unit cover opened | ||||
|
|
|
|
|
| |
Note:
Selectors 3 and 4 are applicable only to models equipped with cordless handsets.
- Selector 2: CR motor torque variation reduction control (Not used.)
Printing quality may be lowered due to changes in the head/carriage travel speed resulting from variations in the torque of the CR motor during operation. If selector 2 is set to “0,” the CR motor drive current will be controlled so as to inhibit variations in torque, resulting in a smooth CR motor rotation.
- Selectors 5 through 7: Microphone level and echo cancellation ON/OFF (Not used.)
Microphone level 0 is the highest microphone volume setting. The higher the microphone level, the lower the microphone volume setting. The microphone level can also be adjusted by means of a user function. In other words, the microphone level depends on the setting of the user function as well as on the setting by these selectors.
Using the echo cancellation function, it is possible to reduce echoes both during speaking and hearing.
-Selector 8: Support between nearly empty → empty with main unit cover open after nearly empty detection (Not used.)
If this selector is set to “0,” the nearly empty ink state, if detected, will be replaced by the empty ink state when the main unit cover is opened, thus prompting the user to replace the ink cartridge immediately.
App. | Confidential |