8.45Develop Release Sensor PCB ASSY

(1)Remove the cup B M3x8 Taptite screw.

(2)Remove the Develop release sensor PCB ASSY from the Frame unit. Disconnect the Connector from the Develop release sensor PCB ASSY.

Frame unit

Hook

Connector

Taptite, cup B M3x8 (Tightening torque: 0.60 ±0.1 N m) *1

Develop release sensor PCB ASSY

<Left side>

Fig. 3-244

*1 Tightening Note:

When tightening the screw, slowly turn it counterclockwise (in the direction to loosen the screw) with your hand until you feel that the screw is a little dropped in the hole. Then, slightly turn it clockwise (in the direction to tighten the screw) with your hand and tighten it according to the specified torque with a screwdriver.

8.46Develop Press Drive L ASSY

(1)Remove the Pull up lever spring (for L) from the Hook of Develop press drive L ASSY.

Frame unit

Develop press drive L ASSY

<Left side>

Hook

Pull up lever spring (for L)

Pull up lever L

Fig. 3-245

3-166

Confidential