Error code 85
No Tray
A Tray is not detected, install Tray 1.
Tray 1 (T1) is not installed into the machine.
User Check
-Check if tray 1 (T1) is installed into the machine.
-Check if the paper is jammed in tray 1 (T1).
Step | Cause | Remedy |
|
|
|
1 | T1 PE/edge sensor PCB | Check the sensor performance following the |
| failure | procedure described in “Maintenance mode 32”. If |
|
| any problem occurs, replace the T1 PE/edge |
|
| sensor PCB ASSY. |
2 | Harness connection failure of | Check the harness connection of the T1 PE/edge |
| T1 PE/edge sensor PCB | sensor PCB ASSY and reconnect it. |
| ASSY |
|
3 | Engine PCB failure | Replace the engine PCB ASSY. |
Error code 86
No Tray
Tray 2 (LT) is not installed into the machine.
User Check
-Install Tray 2 (LT) into the machine.
-Select other tray than Tray 2.
Step | Cause | Remedy |
|
|
|
1 | Cassette sensor failure | Check the sensor performance following the |
|
| procedure described in “Maintenance mode 32”. If |
|
| any problem occurs, replace the LT paper feed |
|
| frame unit. |
Confidential |