(4)Assemble the Lift arm, Feed roller shaft TR and Separation roller drive shaft of the Paper feed frame unit following the procedure described below.
<Assembling the Lift arm>
Implement the operations below while holding the status described in Step (3).
1)When pushing up the Roller holder ASSY with your hand, the end (section “A”) of the Lift arm goes down. That makes easy to push the end of the Lift arm under the section “B” shown in Fig.
<Left side>
Lift arm
Paper feed frame unit
“A”
Roller holder ASSY
<Front>
Fig.
2)Push up the section “B” of the Side frame L with the end (section “A”) of the Lift arm and place the section “A” under the section “B”. Then, make sure to put the section “A” into the space between the Hooks B and C inside the machine, and assemble the Paper feed frame unit into the machine.
Paper feed frame unit | “B” |
| |
“A” |
|
“B”
“A”
Hook B
Hook C
Side frame L
<Front>
Fig.
Confidential |